- PDC for Geological Drilling
-
- The PDC products are super hard compound material, consist of high quality diamond micro powder bonded together by introducing unique cubic press sintering at HTHP. Featured by D-D covalent bond conjunction in diamond particles and the firmly combination in micron powder layer with cemented carbide. Accordingly, there are two main applications, PDC for geological drilling and PDC for oil and gas drilling.
- PDC products apply to making drill bits like core drill bits, no core drill bits and reaming drill bits in well drilling, oil and gas drilling, hydro geological drilling, engineering geological drilling, etc.
-
MD1304-12
High drilling efficiency
Long drilling life
Apply to making high quality anchor rod drill bits, core drill bits, no core drill bits, etc.Diameter(mm) Thickness(mm) Diamond layer(mm) Surface Shape 13.44 4.5 1.2 Flat
MD1305-12T
Surface shape of MD1305-12T is trapezoidal, represents higher drilling rate for its smaller negative rake angle than that of cambered PDC.
Stress-free design
High compressive strength than flat PDC
High drilling efficiency in harder and complicated formation drilling
Long drilling life
As side teeth of high quality no core drill bits, main teeth of multi wing scraper drill bits, etc.Diameter(mm) Thickness(mm) Diamond layer(mm) Surface Shape 13.44 5.5 1.2 Trapezoidal
MD1306-16
Highest diamond layer toughness and the bond strength between diamond layer and carbide.
Highly cost-effective
High drilling efficiency
Long drilling life
Apply to making high quality core drilling bits, no core drilling bits, multi wing scraper drill bits, etc.Diameter(mm) Thickness(mm) Diamond layer(mm) Surface Shape 13.44 6.0 1.6 Flat
MD1308-15
Good cutting edge surface, big shearing force, high rock broken rate.
Protect the broken of central teeth, breaking off of central columns, and extra abrasion of gauge teeth.
High drilling efficiency
Long drilling life
Excellent impact toughness
As main teeth of high quality core drill bits, no core drill bits, multi wing scraper drill bits, etc.Diameter(mm) Thickness(mm) Diamond layer(mm) Surface Shape 13.44 8.0 1.5 Flat
MD1308-15M
Smaller cutting force and lower drilling rate for it working by pressing and scraping rather than cutting
Higher impact toughness of diamond layer
Represent high efficiency in harder and complicated formation drilling.
Long drilling life-
Apply to making core drill bits, no core drill bits, or as the side teeth of large diameter drill bits, etc.Diameter(mm) Thickness(mm) Diamond layer(mm) Surface Shape 13.44 8.5 1.5 Cambered